Best/Safe Bitcoin Cloud Mining Companies 2020 | Bit-Sites

MiningPoolHub

This sub is strictly focused on mining on the MiningPoolHub service.
[link]

CoinSolver -- Profit Switching Scrypt Pool w/Nightly Bonus

CoinSovler is a new auto-switching scrypt coin mining pool that pays out directly in BitCoin. We're still in Beta, so suggestions and feedback are most welcome, and we have many features in the works. We intend for it to be dead simple to use, highly profitable and very transparent about the mining information.
[link]

Step by Step Guide to Starting Smart Mining of ViaBTC

Step by Step Guide to Starting Smart Mining of ViaBTC
In order to help our miners to get the best possible profits, now we present you the step by step guide to starting Smart Mining of ViaBTC. No time for hesitation, try Smart Mining now!
Smart mining consists of two different mining modes, namely as “Manual Switch” and “Auto Switch”.
Auto Switch provides an automated way of profitable mining using the designated algorithm to monitor the real-time status of possible returns. In comparison to manual switch, it’s more flexible and easier to keep tracking of your mining returns.
1.
Enable Auto Switch
It now supports BTC、BCH and BSV, besides, your assets in your account can also be converted into BTC on an hourly basis automatically.
Before enabling auto switch mode, you’re required to configure smart mining URL: stratum+tcp://bitcoin.viabtc.com:3333;
Enable Manual Switch
This supports Bitcoin pool (BTC, BCH, BSV, FCH) and Ethereum pool (ETH, ETC).
One-click switch address is different from the stratum URL for a specified coin. Details for one-click switch URL are listed as following: BTC/BCH/BSV/FCH: stratum+tcp://bitcoin.viabtc.com:3333 ETH/ETC: stratum+tcp://ethereum.viabtc.com:3333 Noted: Port 25 or 443 is available as an alternative option.
2.
Go to www.viabtc.com then click [Settings] from the drop-down menu on your right hand side.
https://preview.redd.it/6rvece3anm551.png?width=1400&format=png&auto=webp&s=bf1365d690542a9d49712fecf1c117e5e94c74f4
Click [Switch mining pool] under the [Mining Settings] to select a new coin type.

https://preview.redd.it/8ag76racnm551.png?width=1400&format=png&auto=webp&s=2b79ffb7dfde4e0b7ab51bb584815a1b8b91f30c
Select “Mode” and “Coin Type”
https://preview.redd.it/7zmjh3ienm551.png?width=1400&format=png&auto=webp&s=2c2ff5f99265402def95717f4a28de71ffe17b32
Frequently Asked Questions
What is the unique feature of Auto Switch compares to Manual Switch? It’s more flexible and easy to set up, SHA-256 mining algorithm compatible.
How long will it take to be activated after enabling Auto Switch? Once Auto Switch is on, system will monitor the possible return rate of all compatible coins using a designated algorithm and switch to the one with higher profits, you may go to the Pool panel for more accurate mining status.
Why I can’t see my earnings increased after enabling Auto Switch mode? Auto Switch mode demands high-efficiency when it switch between the current mined coins to the new one with possible high returns, specified using designated algorithm and current difficulty, thus it’s not a guarantee pass for high returns when “Auto Switch” is on.
Is there any requirements of MIN. limit of hashrate before enabling Auto Switch? There is no minimum limit of hashrate in your account before enabling Auto Switch in your account.
Which type of coins are supported in Auto Switch mode? Currently all types of coins in Bitcoin Pool are supported in Auto Switch mode, including BTC, BCH and BSV.
When will the mining rewards distributed to my account? Rewards distribution are varies for different mining modes, and distribution time remained unchanged compares to the one in Manual Switch mode.
Can I use part of hashrate to mine a designated coin after enabling Auto Switch? After enabling Auto Switch, hashrate connecting to your account will switch from one to the other automatically using a designated algorithm.
Will I receive hashrate fluctuation notification after enabling Auto Switch? You’re required to set hashrate fluctuation notification for all compatible coins by the time enabling Auto Switch, more detailed guideline can be found here.
How to check your current mining preference?
Go to www.viabtc.com first then enter [Pool] panel to check your current mining preference.
When should I change my mining preference?
It is recommended to use profit calculator to get a general idea of the theoretical earnings outcome when selecting mining preference.
submitted by ViaBTC to BitcoinMining [link] [comments]

[EasyBTC] Web based mining control with profitability switching (2020 supported)

EasyBTC - program for automatic mining Main idea 1. Monitoring mining pools in real time. 2. Support most algorithms 3. Working with pools that have auto exchange for bitcoin 5. Monitoring the status of video cards. 6. Automatic switching of miners for profitability 7. Automatic switching of MSIAfterburner profiles. 8. Simple interface and setup. 9. Built-in benchmark algorithms.
Mining fee consists not only from electricity, but mostly from administrative tasks. You should monitor cryptocurrency prices, difficulty, exchange currencies. If you have several rigs with different series GPUs, it becomes hard work. Especially if your want to control rigs remotely.
EasyMiner try to cover all this questions. It would be useful as for newbie miners with couple GPUs, as experienced miners with multiple rigs. DOWNLOAD AND START
Features
-Easy install. No need to find mining software, create wallets for each cryptocurrency, exchange cryptocurrency. You need just download and install app.
-Web basedcontrol center. You can control all your miners from one point.
-Auto switch miners. Mining Agent continuously checks exchange rates and difficulty of cryptocurrencies and switches to most profitable. For now, EasyMiner supports switching between Ethereum and ZCash. Tell me currencies you need. I will add them.
-Per GPU benchmarks and mining. If you have rig with different series of GPUs, Agent will load each GPU with most profitable algorithm.
-BTC payouts. All your mined coins will be exchanged to Bitcoin and transferred to your wallet.
-Detailed stats. You may see all your stats at Dashboard.
- Supports failover.
-Displays detailed mining information and hashrate for every card.
-Supports GPU selection, built-in GPU overclocking features and temperature management.
Requirements
- Windows 10x64
- Nvidia GPUs 10xx series
- At least 4Gb RAM (Depends on miner)

Pools:
NiceHash AhashPool ZergPool MultiPoolHub
MiningRigRentals ZPool BlazePool BlockMasters
I recommend nice and zerg, both basic and zpool in addition.
Coming Soon
- SMS alert
- Mobile app
submitted by TriangleGeorge to altcoins [link] [comments]

Vertcoin Mining AMA

What is Vertcoin?

Vertcoin was created in 2014. It is a direct hedge against long term mining consensus centralization on the Bitcoin mining network. Vertcoin achieves its mining consensus solely through Graphics Cards as they are the most abundant / widely available consensus devices that produce a reasonable amount of hashrate. This is done using a mining algorithm that deliberately geared against devices like ASICs, FPGAs and CPUs (due to botnets) making them extremely inefficient. Consensus distribution over time is the most important aspect of a blockchain and should not be taken lightly. It is critical that you understand what blockchain specifications mean/do to fully understand Vertcoin.

Mining Vertcoin

When users of our network send each other Vertcoin, their transactions are secured by a process called mining. Miners will compose a so-called block out of the pending transactions, and need to perform a large number of computations called hashes in order to produce the Proof-of-Work. With this Proof-of-Work, the block is accepted by the network and the transactions in it become confirmed.
Mining is essentially a race. Whoever finds a valid Proof-of-Work and gets the block propagated over more than half of the Vertcoin network first, wins this race and is allowed to reward themselves with the block reward. The block reward is how new Vertcoin come in circulation. This block reward started at 50 VTC when Vertcoin was launched, and halves every four years. The current block reward is 25 VTC.
Vertcoin's One Click Miner: https://github.com/vertcoin-project/One-Click-Minereleases
Learn more about mining here: https://vertcoin.org/mine/
Specification List:
· Launch date: Jan 11, 2014
· Proof-Of-Work (Consensus Mechanism)
· Total Supply: 84,000,000 Vertcoin
· Preferred Consensus Device: GPU
· Mining Algorithm: Lyra2REv3 (Made by Vertcoin)
· Blocktime: 2.5 minutes
· SegWit: Activated
· Difficulty Adjustment Algorithm: Kimoto Gravity Well (Every Block)
· Block Halving: 4 year interval
· Initial Block Reward: 50 coins
· Current Block Reward: 25 coin
More spec information can be found here: https://vertcoin.org/specs-explained/

Why Does Vertcoin Use GPUs Then?

ASIC’s (Manufactuer Monopoly)
If mining were just a spade sure, use the most powerful equipment which would be an ASIC. The problem is ASICs are not widely available, and just happen to be controlled by a monopoly in China.
So, you want the most widely available tool that produces a fair amount of hashrate, which currently manifests itself as a Graphics Card.
CPUs would be great too but unfortunately there are viruses that take over hundreds of thousands of computers called Botnets (they’re almost as bad as ASICs).

Mining In Pools

Because mining is a race, it’s difficult for an individual miner to acquire enough computational power to win this race solo. Therefore there’s a concept called pool-mining. With pool-mining, miners cooperate in finding the correct Proof-of-Work for the block, and share the block reward based on the work contributed. The amount of work contributed is measured in so-called shares. Finding the Proof-of-Work for a share is much easier than finding it for a block, and when the cooperating miners find the Proof-of-Work for the block, they distribute the reward based on the number of shares each miner found. Vertcoin always recommends using P2Pool to keep mining as decentralized as possible.
How Do I Get Started?
If you want to get started mining, check out the Mine Vertcoin page.

Vertcoin just forked to Lyra2REv3 and we are currently working on Verthash

Verthash is and was under development before we decided to hard fork to Lyra2REv3. While Verthash would’ve resulted in the same effect for ASICs (making them useless for mining Vertcoin), the timeline was incompatible with the desire to get rid of ASICs quickly. Verthash is still under development and tries to address the outsourcability problem.
Verthash is an I/O bound algorithm that uses the blockchain data as input to the hashing algorithm. It therefore requires miners to have all the blockchain data available to them, which is currently about 4 GB of data. By making this mining data mandatory, it will become harder for auto profit switching miners — like the ones that rent out their GPU to Nicehash — because they will need to keep a full node running while mining other algorithms for the moment Verthash becomes more profitable — the data needs to be available immediately since updating it can take a while.
Over the past month, we have successfully developed a first implementation of Verthash in the Vertcoin Core code base. Within the development team we have run a few nodes on Testnet to test the functionality — and everything seems to work properly. The next step is to build out the GPU miners for AMD and Nvidia. This is a NOETA at the moment, since we’re waiting on GPU developers which are in high demand. Once the miners are ready, we’ll be releasing the Vertcoin 0.15 beta that hardforks the testnet together with the miners for the community to have a testrun. Given the structural difference between Lyra2RE and Verthash, we’ll have to run the testnet for a longer period than we did with the Lyra2REv3 hard fork. We’ll have to make sure the system is reliable before hardforking our mainnet. So the timeline will be longer than with the Lyra2REv3 hard fork.
Some people in the community have voiced concerns about the fact that Verthash development is not being done “out in the open”, i.e.: the code commits are not visible on Github. The main two reasons for us to keep our cards to our chest at this stage are: (1) only when the entire system including miners has been coded up can we be sure the system works, we don’t want to release preliminary stuff that doesn’t work or isn’t secure. Also (2) we don’t want to give hardware manufacturers or mining outsourcing platforms a head start on trying to defeat the mechanisms we’ve put in place.

Links and Resources

· Twitter: https://twitter.com/Vertcoin
· Donations: vertcoin.org/donate
· Join our Discord: https://discord.gg/vertcoin
· Reddit: https://www.reddit.com/vertcoin/
· Official Website: https://vertcoin.org/
· Facebook: https://www.facebook.com/vertcoin
· Vertcoin Talk: https://soundcloud.com/vertcoin-talk
· Youtube: https://www.youtube.com/vertcoin
submitted by Canen01 to gpumining [link] [comments]

Monumental AIOMiner Update v8.4 - Mine the most profitable currencies on 74+ Algorithms (1000+ coins) while paying 0% Fees, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on /gpumining. Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
Edit: When releasing the new website, Google's Crawler flagged us as experiencing a hostile takeover and as a result, you may get a message warning of malicious content. We checked everything and there is no malware or malicious software on aiominer.com. We are actively working with Google to get this resolved as quickly as we can!
submitted by AIOMiner to gpumining [link] [comments]

What do you use to calculate mining profits? My numbers are about 15% under my earnings on MPH.

I've been calculating using Whattomine, and as the title says, coming up about 15% short of those revenue calculations. I'm not cherry picking data, this is just what I've gathered after watching the prices each day for a couple of weeks.
I'm not claiming that anything fishy is going on with MPH- I'd just like an explanation on why my calculations are off. Is whattomine using bad numbers for their difficulty or something? Or is there an additional "fee" when auto-exchanging for other coins on MPH?
submitted by slimslider to MiningPoolHub [link] [comments]

MiningPoolHub/AwesomeMiner/MultiMinningPool FAQ

Hello everyone,
As some of you have probably noticed I have been taking the time to try my best to help some of you answer some questions.
 
However there has been a lot of repeat questions lately so hopefully this will help. I will continue to update this as we go, please check back if you have any questions as I will try to update this frequently
 
 
If you have a question you do not see covered please feel free to comment and I'll add it and try to answer it. I have added a unresolved to the beginning of this FAQ. I will number them below. Please comment below with the answer, to help me identify which question you are answering please add. UR#(x) to your comment as well, with x being the number of the unresolved question.
 
 
Before we start I will get my disclaimer out of the way.
I do not work with/for any of the developers of these programs. I do not have all the answers. Some of these are my best guess, others may be wrong or may have a better solution than the one I give. Please feel free to correct me if this is the case and I will edit as we go.
 
 
Set-up
We have two text guides here by waffleflops one for awesome miner and one for multi mining pool.
We also have a YouTube video guide by razorseal
 
YouTube Video Guide: Here
Awesome Miner(AM): Text Tutorial
MultiPoolMiner(MPM): Text Tutorial
 
 
So which one should I use?
It seems like it depends on what you want from the program, Awesome Miner is more like Nicehash in the way it looks but can be a little more complicated. MPM is pretty simple but it has less customization for those not familiar with programming.
 
NX18: "I find MPM to be better. No stability issues, no funky windows service always running in the background, and it checks MPH for best coin to mine whereas AM checks whattomine.com and they differ significantly sometimes."
 
MPM also has a minimum dev fee of 10 minutes per day (even if you set donate to 0) whereas AM does not seem to have dev fees. Both I believe have fees included that go to the devs of the miner programs themselves. However these fees for the miner devs will be attached whether you use MPM/AM or solo miner with the miner dev programs anyway.
 
 
Unresolved Questions
 
1. Anyone have solutions on crashing or very low Hashrates in sgminers with AMD GPU's in Awesome Miner?
2. Why is Lyra2Z using only 40% power from my GPU (GTX980ti)? Where/how can it tweak the settings?
I believe this is having to do with Awesome Miner 3.I did not see it asked or posted but I am curious if there's a way to bench all gpus. Instead of selecting gpu 0 and benching, waiting until its done and moving on to gpu 1 and so on. I have 8 nvidia gpus, just wondering if there's a way to auto bench all of them in a row so I can walk away and go to bed, be done I'm the middle of the night.
 
 
General MPH Questions
 
1.Hashrate is not the same on my miner as it is on the dashboard?
From MPH: "Hashrate showing on site is just an estimated value. Pool doesn't know about miner very much. It just collects certain "shares" which is some piece of hash that satisfies certain conditions. So don't worry, it's all about probability thing. Your hashrate on site can go up and down time to time."
There is some luck involved when mining in pools it is like playing the lottery. NiceHash paid at a certain rate because you were not mining coins and getting paid you were getting paid for the hash you are providing.
 
2. Balances on MPH what are the brackets?
The brackets are coins that have not yet been confirmed enough times on the blockchain. Any coins not in brackets have been confirmed.
 
3. How long will it take for my coins to show up, transfer to and from the exchange, be credited to my auto exchange coin?
 
I have been seeing a lot of questions about this so I made a flowchart which you can view Here
 
Short Answer: It depends could be minutes could be days
Long Answer: It has to be exchanged first and then placed in auto-exchange balance balance.
So you mine coin
Coin credited but unconfirmed (this can take time depending on coin)
Coin is confirmed and credited for auto exchange.
Coin is then placed on exchange. So again has to be transferred and again has to be confirmed but on exchange side.
Coin is most likely converted into btc then into auto-exchange coin at exchange.
Then auto-exchange coin is sent back to your balance on mph. So again has to be confirmed before appearing.
Depending on how fast a coin is confirmed will depend on how fast it appears in your balance.
If you stopped mining today it your balance most likely continue to grow over time.
However if you continue to mine it should in theory catch up and you will see you balance grow at a semi if not expected rate.
 
Supplemental:Forgive me if I'm misunderstanding, but this should mean it changes column, not disappears from balance entirely, no?
You will not know exact balance until it is sent back over from the exchange. This is because of the fact that you are exchanging the coins against one another. If one coin is up and one is down you could be losing or gaining value depending on the situation. This is why it seems that coins on the exchange disappear without your auto-exchange coins balance going up right away. Reference question 8 for more info
 
4. What is the best coin to auto-exchange?
This depends, just remember BTC has high transaction fees and can take some time to confirm. You will want to have a good amount of BTC before moving to your wallet to minimize the amount you lose to transaction fees.
I personally use LTC, it is quick and transaction fees are low compared to BTC but can still be exchanged for fiat on coinbase.
At the time of writing this, if you move BTC from MPH you will be charged a $4.96 fee, if you move LTC the fee to move to your wallet is $0.19
 
5. Can I hold on to certain coins instead of auto-exchanging them?
Yes, just go to auto exchange on MPH and switch off the coin you do not want to auto exchange.
 
6. This dashboard sucks! Why do they not have a one page dashboard?
Good news it is in the works, improvements are on the way so no need to keep posting about it!
 
7. Why is my coin not being exchanged?
Two possible reasons A)On balances page it says "coins that don't have enough volume on exchange for a certain amount of time will not be auto exchanged to desired coin. These coins may be sent back as original coin or btc."
B)On auto-exchange page. Mph accumulates coins so that they can be efficiently converted at the exchange. If a coins pool has not mined a certain amount it will not be sent over until it reaches the set number. It seems like it is transferred over to the exchange as one large amount instead of small amounts.
 
8. AwesomeMiner said I was going to make $X.XX dollars and when auto-exchange coins came in I made less than it said!
Couple things, do not take to heart the exact number it gives you. It is not exact remember it is like a lottery.
Remember your coins at first will trickle in over time but the longer you mine it will begin to average out.
Remember you are exchanging coins for you auto-exchange coin this means if there is a decrease or increase between them you could gain more or less.
Example if you mine VTC and auto-exchange into LTC.
You send VTC to auto-exchange it will most likely be converted into BTC first. If BTC is having a good day that day and has increased in price by 30% and VTC has not grown well that day you will be trading your VTC at a loss.
Then this same situation will happen again when converting the BTC to LTC.
So again a bit of a lottery you may gain or lose some of your mined coins value depending on the exchange rate between the coins at the time.
 
9. Add more Cryptonight coins please.
They are apparently working on adding new coins like Electroneum.
 
10. Why can't I auto-exchange BTC?
My theory is that it is because BTC is not mined on MPH, remember the coins are sent to the exchange when they hit a certain amount in order to make it efficient. Because BTC is not mined on MPH it would not be efficient to exchange BTC to other coins once it has been credited to your account.
 
11. Do I need a wallet for each coin I mine? How do I set-up a wallet?
No, only the coin(s) you want to get paid in. Click on coins pool on MPH and you will see a wallet option Add the correct address for each coin you want to be paid in, note you cannot use another coins address or you risk losing your coins. For example you should not put your Bitcoin address into your Litecoin wallet address section.
 
12. My wallet address keeps on changing, do I need to keep updating my wallet address?
Take from Coinbase: This is done to protect your privacy, so that a third-party can not view all other transactions associated with your account simply by using a blockchain explorer to look-up an address they know to be yours.
All addresses that have been generated for your account will remain associated with your account forever. They are safe to re-use to receive future payments, but for the prior stated reasons, we recommend using a unique address for all transactions.
 
13.Is there a easy way I can track my Profits/Hashrate/Workers?
Yes credit to JaymZZZ Click Here
 
14. I click on manage wallet from the balances menu and enter my account number, I get the error saying Failed to update your account: Invalid coin address.
Make sure you are adding the address to the correct coin. A bitcoin address for example should only be added to the bitcoin wallet, it should not be added to any other wallet. (Reference question 11)
 
15. Is there a fee for auto-exchange?
Yes 0.2%
 
 
Awesome Miner
 
1. I do not want to mine that algo, I turn it off but it still mines it!
Go to online services, edit, change profit switching from yes to no
 
2. Why is it mining something less profitable?
Make sure you go to tools and then benchmark Make sure you right click and save hashrate occasionally it will improve your profit switching over time.
 
3. I can't get the miner to run?
Did you exclude it from anti-virus?
You may need to reinstall.
Uninstall
then in search bar type in %localappdata%\awesomeminer (delete this folder)
Type in %appdata% go to awesome miner folder and delete this one as well
Reinstall awesomeminer
Do not run aweseomminer
Go to anti-virus and exclude all folders with awesomeminer (including the ones in the local and appdata folders)
 
4. How do i delete a Miner?
samualsmash: https://i.imgur.com/SSr1rnH.png
 
5. Can I do anything to make improvements?
puch0021:You can use VertMiner (which is what is used by OCM) to increase your hash rate compared to AwesomeMiner's default CCminer. You have to choose it for Lyra instead of CC miner. See: http://www.awesomeminer.com/help/managedsoftware.aspx Download Vertminer and extract software. Go to awesomeminer's options -> managed software -> add new user defined mining software: Type in VertMiner for description, full compatibility mode, and compatible software as CCminer. Everything in the algorithm should be disabled expect Lyra2ReV2 which should be enabled. Double click in under defined command line argument and add lyra2v2 as text. Click ok. Go to profit profiles in awesome miner. Select nvidia GPU and edit. In the mining software list there should be a new VertMiner entry. Check this box to enable it. Then click configure and then under path click browse. Click local. Select the Vertminer folder you previously made. Now whenever lyra is called for, vertminer should be used. If you try to bench mark with this enabled, it will fail but it works for mining. You can then use your mining results to manually edit your profit profile value for Lyra2REv2 (that was otherwise has the old value for ccminer.) On my 1060 it went from 21 to 22.8. Keep in mind vertminer takes 2% dev fees but it still works out to be faster than cc miner. let me know if this was any help!
I used one click miners vertminer since it was already installed.
 
6. Whenever Awesome Miner starts on a new algo and opens new instances of the CLI miner application/s, the window steal the focus from whatever you're doing. Anyone else super annoyed by this? Anyone know of a way to prevent this?
Stop mining, click more, properties, environment, console window mode, hide window, start mining again.
 
 
MultiPoolMiner (MPM)
 
1. I see a yellow stripe wich says multipoolminer is between 7% and 17% more profitable, which is nice. under this strip I see 2 lines with miner, BTC and Euro. (in my case) which of those btc values end up on your miningpoolhub balance? or both?
NX18:" Neither. Those values are best guesses by that script, hence why beside the dollar figure it shows the +/- variance which sometimes is really high like 25%, meaning that scripts best guess could be wrong by that much"
It is showing the 2nd best, If it is not the best at the time it will not show that text and just give you the comparison.
 
2. It keeps say NiceHash API failed what should I do? You can ignore it or as chillfisch points out that you can just delete the nicehash folder to get rid of this warning.
 
 
Tips
Gator-Empire
BTC: 16pVcKVFRJnCpR3hohMZtSTuiFiYy8MuCY LTC: LagCM9kiRHSbfx7ycCdrsae3QxqyycrFEr ETH: 0x6bbfe42dadc1894a19ad448b8296E7e7da383D2d
 
Waffleflops (MPM and Awesome Miner tutorial creator)
BTC: 17zd54AxSZekcPkVyEiX6TrcJkUe2qja51 LTC: LeyvTNrQfrhHK8TgtB8qWzKTMmNSaRif5m ETH: 0xaE19a33f3f9568e8775A05A92DF2fca4f3a5405b
 
JaymZZZ (Profit/Hashrate/Worker tracker creator)
BTC: 17ZjS6ZJTCNWrd17kkZpgRHYZJjkq5qT5A LTC: LdGQgurUKH2J7iBBPcXWyLKUb8uUgXCfFF ETH: 0x6e259a08a1596653cbf66b2ae2c36c46ca123523
 
razorseal (YouTube video guide creator)
BTC: 13UtW3vN4DKmmjV45dL5LHwcV8svu9tuzz LTC: Lh2DiirhVhFdX9VwWS5cY9dxyRGKV9JDGs ETH:0x260fAdC32972ca102C5CA3fAF3996C609C6C0311
submitted by Gator-Empire to MiningPoolHub [link] [comments]

To profit switch, or not to profit switch? (antminer)

Hi guys, started mining on slushpool with my s9's. I'm wondering if it makes sense to instead add these to my awesomeminer config and run profit switching through the various sha256 algos or not? If so, any pool suggestions? Nicehash is 4th on the list over at whattomine, so it seems like more profits are around in other pools. If profit switching is a no go, does anyone have a suggestion for a pool other than slush?
submitted by blove05 to BitcoinMining [link] [comments]

Monumental AIOMiner Update v8.4 - Mine ETH while paying 0% Fees, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on Reddit(/gpumining). Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
submitted by AIOMiner to EtherMining [link] [comments]

MiningPoolHub + NiceHash + WhatToMine = ?

Hi all!
Let's assume someone has the following mining objectives:
  1. Build a setup-and-forget rig, because personal time is too important to be entirelly spent monitoring hashing power and currency rates.
  2. Always mine the most profitable coin for their hardware, even if that means changing to other pools.
  3. Automatically exchange all mined coins to preffered one.
At this time the 2 most popular ways to approach these objectives are:
  1. NiceHash. It pays in BTC but has 2 disadvantages: a) Its switching algo is not transparent, so you can't be sure they always choose the best for you and b) You can't change the payout coin.
  2. MiningPoolHub. You can choose the payout coin and it supports both in-algo and multi-algo coin switching.
  3. MultiPoolMiner. Powerfull but, no GUI?
Methods (1) and (2) are different pools and cannot be used simultaneously for auto switching.
So what's left? is there a way to easily setup a rig for auto switching, without limits regarding algos, pools and miners?
Please let me know if I'm missing something.
What I am trying to do:
Yesterday I built a new small rig with 2 1070ti.
I'm using BiggerDigger, a mining automator I created.
(This post is not about promoting it, I just need some advice)
I set it up to check WhatToMine.com every 10 minutes and auto mine the most profitable coin for my hardware, using ccminer and EWBF.
The 'miners.txt' file is as follows:
# USAGE: coin_name | miner_executable | parameters | pool | wallet
BitcoinGold | C:\Miners\EWBF\miner.exe | --server europe.equihash-hub.miningpoolhub.com --user user.worker --pass x --port 20595 | https://bitcoin-gold.miningpoolhub.com/index.php?page=dashboard | https://bitcoin-gold.miningpoolhub.com/index.php?page=account&action=pooledit Nicehash-Equihash | C:\Miners\EWBF\miner.exe | --server equihash.eu.nicehash.com --user user.worker --pass x --port 3357 | https://www.nicehash.com/minemy | https://www.nicehash.com/wallet Nicehash-Lyra2REv2 | C:\Miners\ccminer\ccminer-x64.exe | -a lyra2rev2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u user.worker -p x | https://www.nicehash.com/minemy | https://www.nicehash.com/wallet Zcash | C:\Miners\EWBF\miner.exe | --server europe.equihash-hub.miningpoolhub.com --user user.worker --pass x --port 20570 | https://zcash.miningpoolhub.com/index.php?page=dashboard | https://zcash.miningpoolhub.com/index.php?page=account&action=pooledit Zclassic | C:\Miners\EWBF\miner.exe | --server europe.equihash-hub.miningpoolhub.com --user user.worker --pass x --port 20575 | https://zclassic.miningpoolhub.com/index.php?page=dashboard | https://zclassic.miningpoolhub.com/index.php?page=account&action=pooledit Zencash | C:\Miners\EWBF\miner.exe | --server europe.equihash-hub.miningpoolhub.com --user user.worker --pass x --port 20594 | https://zencash.miningpoolhub.com/index.php?page=dashboard | https://zencash.miningpoolhub.com/index.php?page=account&action=pooledit
 
In brief, I set it up to:
 
I'd appreciate any answer to the following questions:
submitted by kevinpat5 to gpumining [link] [comments]

StrataMiner is ready for download. Feature-packed software package for controlling and monitoring any number of rigs.

StrataMiner is now released for beta testing. Looking for a few brave miners.
Go to strataminer.com to learn and install.
I'll be answering any questions here today. For technical support, please email me at [email protected]. Tell me what operating system you're on in the email message.
Features
Windows and Linux - Made for both. Client and Control Center don't need to be on the same OS either.
Profit Switching - Flip the switch and you'll always be mining the best currency for each device.
Any pool - StrataMiner works with any pool using a standard stratum protocol.
Web Portal - Control your rigs from anywhere on the planet with an internet connection.
24 coins and counting - AEON, Bitcoin Gold, Denarius, Ethereum, Ethereum Classic, GoByte, Groestlcoin, HUSH, Komodo, LOKI, Monacoin, Monero, MusicCoin, Pirl, Quantum Resistant Ledger, Ravencoin, Trezarcoin, Ubiq, Verge, Vertcoin, Vivo, ZCash, ZClassic, Zen. More coming.
Exchange address generation - StrataMiner can generate deposit addresses on your Cryptopia and Bittrex accounts. Once your crypto hits your exchange, you can easily exchange for 100s of others. More exchanges coming soon.
One-click updates - No installers required for updates of mining core software. Stay up-to-date through Control Center with a single click.
Community features - With pool sharing enabled, you become part of a community working to ensure pools are always available and trustworthy. This service is part of StrataMiner's commitment to decentralized mining.
Hashrate verification - StrataMiner's proprietary Adaptive Proxy technology enables auditing of pool communications to verify that hashrate reports match share submission statistics. In other words, StrataMiner makes sure everybody is being honest.
Familiar miner cores - Ethminer, Claymore Miner, CCMiner, EWBF, XMR-Stak
Automatic network configuration - The Control Center and Client know how to find each other. Turn them on and go.
Email notifications - Requires Gmail. Receive an email if something's not right. The messaging is still a little rudimentary.
Low fees - 0.5% for development. Miner cores and pools may have additional fees.
Earnings tracking - Earnings estimations are tracked over time. Earnings are recorded in both USD and crypto.
Market data - Up to date market information for each currency, including market capitalization, price, and 24-hour change.
Open source software - The Control Center is open-source and written in Python 3. See pystrata on github if you're interested in fiddling with the code.
What you get for your fee
New miners and algorithms - New stable miners will be incorporated based on community desire. Strataminer tracks algorithm changes and blockchain forks for you, so you'll always have working software, if available.
New coins - Many can be added within hours of receiving a request. No software updates required.
New features - The feature set will be improved based on community feedback. This is only the beginning.
Technical support - Development fees enable StrataMiner to respond to issues and fix bugs quickly and continuously.
StrataMiner API - New coin data, new mining software, and some market data come from the StrataMiner API.
An obvious drawback is that you'll need an address for each currency that you want to mine. If you have Cryptopia and Bittrex accounts, you can use auto-generation to make addresses for all but 4 of the supported currencies (XMR, AEON, LOKI, QRL). I'll work on integrating Binance, CoinExchange, and HitBTC next.
The Coinomi mobile wallet can also get you 16 of the 24 supported currencies.
You'll need pretty fresh drivers, partly for StrataMiner and partly for the miner cores, i.e. Ethminer, ... I actually expect to ease up on StrataMiner's driver requirements a little, but you'll still want to keep fresh drivers for the mining software updates, as they come.
On request, I've lowered the driver requirements for StrataMiner itself, but if you don't have the newest drivers, you may not be able to use Ethminer. You can still use Claymore for Ethash though. Minimum drivers are now >= 385.54 on Windows, >= 384.81 on Linux.
StrataMiner is not affiliated with or sponsored by any exchange, any pool, any other website, or any other software vendor.
submitted by buck54321 to gpumining [link] [comments]

One Click Nvidia setup! MiningPoolHub + AwesomeMiner / Finally, easy as the Nicehash!

After spending two days trying to figure this bloody Awesome miner. Really, the worst software design EVER! I finally made a nice, stable setup which earns noticeably more than the Nicehash I used before!
I figured, I can share my Awesome Miner profile and make the Nvidia setup easy for everyone with a Single Click!
https://www.dropbox.com/s/zvd5zurcxrvpqx7/AwesomeMinerSettingsForNvidia.awesome?dl=0
Profile is optimized for Nvidia. I'm using 1080ti myself.
I'm mining with the ccMiner Lyra2REv2 Monacoin/Vertcoin as this is the most profitable algo on Nicehash, it's recommended by the What to mine and usually is on the top on Mining Pool Hub listing too.
So it's as easy, as installing the Awesomeminer http://www.awesomeminer.com/
Double clicking the profile
And registering your username on the Mining Pool Hub https://miningpoolhub.com/
Starting the miner job.
The result with a single Nvidia 1080ti - 57MH/s and ~$8/day on current coin rate! https://c1.staticflickr.com/5/4681/38176546355_df35379466_b.jpg
If this was helpful, I appreciate mining donations to my username at
Originalas.MonaMiner:x
UPDATE 2017-12-15 Here is AutoSwitchingProfile for Nvidia
https://www.dropbox.com/s/wf82ciyvvtqxldi/Singel%2BAutoSwitchingForNvidiaExport.awesome?dl=0
Screenshot https://c1.staticflickr.com/5/4596/24205422337_04544c2def_b.jpg
Keep in mind.
With the Mining Pool Hub you are mining coins and then exchanging them to bitcoin. So if you are mining the most expensive coin, it's the same as buying high and selling low (negative profit).
With the Nicehash you don't get any alt coins. You are simply paid for the hashrate in bitcoin, and in that case it was the most profitable to auto switch to a highest bidder.
So for this reason I'm using a single coin mining with Lyra2REv2 on Mining Pool Hub with my 1080ti. But autoswitching profile might be usefull if you want just to test different cards to see which coins and algorithms are profitable on your build. And then you can edit the single coin profile accordingly.
The most profitable for Nvidia usually are Equihash Zencash / Lyra2RE2 Vertcoin, Monacoin / Lyra2z Zcoin according to the recent month stats.
Exchange rate Monacoin to BTC https://bittrex.com/Market/Index?MarketName=BTC-mona
UPDATE 2017-12-19 I guess, Awesome Miner is just a shitty software. The whole One Click profile idea came to me after the Awesome Miner crashed and forgot all it's settings. Turns out if it crashes it will 1. forget all settings 2. revert to the original profile.
So the solution is to use the one click profile just for the start, put your username, test your system, tune to your preference and export your settings as a new profile. Then reset Awesome Miner settings completely and import your new profile.
Though even better solution is to switch to MPM. Which I have done myself 3 days ago
https://www.reddit.com/MiningPoolHub/comments/7kkz78/one_click_nvidia_mining_setup_v2_multipoolminerv2/
Therefore I won't be updating this thread or Awesome miner profiles anymore.
submitted by Original_as to MiningPoolHub [link] [comments]

Function X: A Concept Paper introducing the f(x) ecosystem, a universal decentralized internet powered by blockchain technology and smart devices

Function X: A Concept Paper introducing the f(x) ecosystem, a universal decentralized internet powered by blockchain technology and smart devices

https://preview.redd.it/yylq6k0yqrv21.png?width=633&format=png&auto=webp&s=089ffe83e18baeceb87d465ca6fad184939490e4

Prologue

This is a Concept Paper written to introduce the Function X Ecosystem, which includes the XPhone. It also addresses the relationship between the XPOS and Function X.
Pundi X has always been a community-driven project. We have lived by the mission of making sure the community comes first and we are constantly learning from discussions and interactions on social media and in real-life meetings.
As with all discussions, there is always background noise but we have found gems in these community discussions. One such example is a question which we found constantly lingering at the back of our mind, “Has blockchain changed the world as the Internet did in the ’90s, and the automobile in the ‘20s?”. Many might argue that it has, given the rise of so many blockchain projects with vast potential in different dimensions (like ours, if we may add). But the question remains, “can blockchain ever become what the Internet, as we know it today, has to the world?”
Function X, a universal decentralized internet which is powered by blockchain technology and smart devices.
Over the past few months, in the process of implementing and deploying the XPOS solution, we believe we found the answer to the question. A nimble development team was set up to bring the answer to life. We discovered that it is indeed possible to bring blockchain to the world of telephony, data transmission, storage and other industries; a world far beyond financial transactions and transfers.
This is supported by end-user smart devices functioning as blockchain nodes. These devices include the XPOS and XPhone developed by Pundi X and will also include many other hardware devices manufactured by other original equipment manufacturers.
The vision we want to achieve for f(x) is to create a fully autonomous and decentralized network that does not rely on any individual, organization or structure.
Due to the nature of the many new concepts introduced within this Concept Paper, we have included a Q&A after each segment to facilitate your understanding. We will continuously update this paper to reflect the progress we’re making.

Function X: The Internet was just the beginning

The advent of the Internet has revolutionized the world. It created a communications layer so robust that it has resulted in TCP/IP becoming the network standard.
The Internet also created a wealth of information so disruptive that a company like Amazon threatened to wipe out all the traditional brick-and-mortar bookstores. These bookstores were forced to either adapt or perish. The same applies to the news publishing sector: the offerings of Google and Facebook have caused the near extinction of traditional newspapers.
The digitalization of the world with the Internet has enabled tech behemoths like Apple, Amazon, Google and Facebook to dominate and rule over traditional companies. The grip of these tech giants is so extensive that it makes you wonder if the choices you make are truly your own or influenced by the data they have on you as a user.
We see the blockchain revolution happening in three phases. The first was how Bitcoin showed the world what digital currency is. The second refers to how Ethereum has provided a platform to build decentralized assets easily. The clearest use case of that has come in the form of the thousands of altcoins seen today that we all are familiar with. The third phase is what many blockchain companies are trying to do now: 1) to bring the performance of blockchain to a whole new level (transaction speed, throughput, sharding, etc.) and 2) to change the course of traditional industries and platforms—including the Internet and user dynamics.
Public blockchains allow trustless transactions. If everything can be transacted on the blockchain in a decentralized manner, the information will flow more efficiently than traditional offerings, without the interception of intermediators. It will level the playing field and prevent data monopolization thus allowing small innovators to develop and flourish by leveraging the resources and data shared on the blockchain.

The Blockchain revolution will be the biggest digital revolution

In order to displace an incumbent technology with something new, we believe the change and improvement which the new technology has to bring will have to be at least a tenfold improvement on all aspects including speed, transparency, scalability and governance (consensus). We are excited to say that the time for this 10-times change is here. It’s time to take it up 10x with Function X.
Function X or f(x) is an ecosystem built entirely on and for the blockchain. Everything in f(x) (including the application source code, transmission protocol and hardware) is completely decentralized and secure. Every bit and byte in f(x) is part of the blockchain.
What we have developed is not just a public chain. It is a total decentralized solution. It consists of five core components: Function X Operating System (OS); Function X distributed ledger (Blockchain); Function X IPFS; FXTP Protocol and Function X Decentralized Docker. All five components serve a single purpose which is to decentralize all services, apps, websites, communications and, most importantly, data.
The purpose of Function X OS is to allow smart hardware and IoTs to harness the upside and potential utility of the decentralization approach. We have built an in-house solution for how mobile phones can leverage Function X OS in the form of the XPhone. Other companies can also employ the Function X OS and further customize it for their own smart devices. Every smart device in the Function X ecosystem can be a node and each will have its own address and private key, uniquely linked to their node names. The OS is based on the Android OS 9.0, therefore benefiting from backward compatibility with Android apps. The Function X OS supports Android apps and Google services (referred to as the traditional mode), as well as the newly developed decentralized services (referred to as the blockchain mode). Other XPhone features powered by the Function X OS will be elaborated on in the following sections.
Using the Function X Ecosystem (namely Function X FXTP), the transmission of data runs on a complex exchange of public and private key data and encryption but never through a centralized intermediary. Hence it guarantees communication without interception and gives users direct access to the data shared by others. Any information that is sent or transacted over the Function X Blockchain will also be recorded on the chain and fully protected by encryption so the ownesender has control over data sharing. And that is how a decentralized system for communications works.
For developers and users transitioning to the Function X platform, it will be a relatively seamless process. We have intentionally designed the process of creating and publishing new decentralized applications (DApps) on Function X to be easy, such that the knowledge and experience from developing and using Android will be transferable. With that in mind, a single line of code in most traditional apps can be modified, and developers can have their transmission protocol moved from the traditional HTTP mode (centralized) to a decentralized mode, thus making the transmission “ownerless” because data can transmit through the network of nodes without being blocked by third parties. How services can be ported easily or built from scratch as DApps will also be explained in the following sections, employing technologies in the Function X ecosystem (namely Function X IPFS, FXTP Protocol and Decentralized Docker).

f(x) Chain

f(x) chain is a set of consensus algorithms in the form of a distributed ledger, as part of the Function X ecosystem. The blockchain is the building block of our distributed ledger that stores and verifies transactions including financials, payments, communications (phone calls, file transfers, storage), services (DApps) and more.
Will Function X launch a mainnet?
Yes. The f(x) chain is a blockchain hence there will be a mainnet.
When will the testnet be launched?
Q2 2019 (projected).
When will the mainnet be launched?
Q3 2019 (projected).
How is the Function X blockchain designed?
The f(x) chain is designed based on the philosophy that any blockchain should be able to address real-life market demand of a constantly growing peer-to-peer network. It is a blockchain with high throughput achieved with a combination of decentralized hardware support (XPOS, XPhone, etc.) and open-source software toolkit enhancements.
What are the physical devices that will be connected to the Function X blockchain?
In due course, the XPOS OS will be replaced by the f(x) OS. On the other hand, the XPhone was designed with full f(x) OS integration in mind, from the ground up. After the f(x) OS onboarding, and with adequate stability testings and improvements, XPOS and XPhone will then be connected to the f(x) Chain.
What are the different elements of a block?
Anything that is transmittable over the distributed network can be stored in the block, including but not limited to phone call records, websites, data packets, source code, etc. It is worth noting that throughout these processes, all data is encrypted and only the owner of the private key has the right to decide how the data should be shared, stored, decrypted or even destroyed.
Which consensus mechanism is used?
Practical Byzantine Fault Tolerance (PBFT).
What are the other implementations of Practical Byzantine Fault Tolerance (PBFT)?
Flight systems that require very low latency. For example, SpaceX’s flight system, Dragon, uses PBFT design philosophy. [Appendix]
How do you create a much faster public chain?
We believe in achieving higher speed, thus hardware and software configurations matter. If your hardware is limited in numbers or processing power, this will limit the transaction speed which may pose security risks. The Ethereum network consists of about 25,000 nodes spread across the globe now, just two years after it was launched. Meanwhile, the Bitcoin network currently has around 7,000 nodes verifying the network. As for Pundi X, with the deployment plan (by us and our partners) for XPOS, XPhone and potentially other smart devices, we anticipate that we will be able to surpass the number of Bitcoin and Ethereum nodes within 1 to 2 years. There are also plans for a very competitive software implementation of our public blockchain, the details for which we will be sharing in the near future.

f(x) OS

The f(x) OS is an Android-modified operating system that is also blockchain-compatible. You can switch seamlessly between the blockchain and the traditional mode. In the blockchain mode, every bit and byte is fully decentralized including your calls, messages, browsers and apps. When in traditional mode, the f(x) OS supports all Android features.
Android is the most open and advanced operating system for smart hardware with over 2 billion monthly active users. Using Android also fits into our philosophy of being an OS/software designer and letting third-party hardware makers produce the hardware for the Function X Ecosystem.
What kind of open source will it be?
This has not been finalized, but the options we are currently considering are Apache or GNU GPLv3.
What kind of hardware will it work on?
The f(x) OS works on ARM architecture, hence it works on most smartphones, tablet computers, smart TVs, Android Auto and smartwatches in the market.
Will you build a new browser?
We are currently using a modified version of the Google Chrome browser. The browser supports both HTTP and FXTP, which means that apart from distributed FXTP contents, users can view traditional contents, such ashttps://www.google.com.
What is the Node Name System (NNS)?
A NNS is a distributed version of the traditional Domain Name System. A NNS allows every piece of Function X hardware, including the XPhone, to have a unique identity. This identity will be the unique identifier and can be called anything with digits and numbers, such as ‘JohnDoe2018’ or ‘AliceBob’. More on NNS in the following sections.
Will a third-party device running the f(x) OS be automatically connected to the f(x) blockchain?
Yes, third-party devices will be connected to the f(x) blockchain automatically.

f(x) FXTP

A transmission protocol defines the rules to allow information to be sent via a network. On the Internet, HTTP is a transmission protocol that governs how information such as website contents can be sent, received and displayed. FXTP is a transmission protocol for the decentralized network.
FXTP is different from HTTP because it is an end-to-end transmission whereby your data can be sent, received and displayed based on a consensus mechanism rather than a client-server based decision-making mechanism. In HTTP, the server (which is controlled by an entity) decides how and if the data is sent (or even monitored), whereas in FXTP, the data is sent out and propagates to the destination based on consensus.
HTTP functions as a request–response protocol in the client-server computing model. A web browser, for example, may be the client and an application running on a computer hosting a website may be the server. FXTP functions as a propagation protocol via a consensus model. A node that propagates the protocol and its packet content is both a “client” and a “server”, hence whether a packet reaches a destination is not determined by any intermediate party and this makes it more secure.

f(x) IPFS

IPFS is a protocol and network designed to store data in a distributed system. A person who wants to retrieve a file will call an identifier (hash) of the file, IPFS then combs through the other nodes and supplies the person with the file.
The file is stored on the IPFS network. If you run your own node, your file would be stored only on your node and available for the world to download. If someone else downloads it and seeds it, then the file will be stored on both your node the node of the individual who downloaded it (similar to BitTorrent).
IPFS is decentralized and more secure, which allows faster file and data transfer.

f(x) DDocker

Docker is computer program designed to make it easier to create, deploy, and run applications. Containers allow a developer to package up an application including libraries, and ship it all out as a package.
As the name suggests, Decentralized Docker is an open platform for developers to build, ship and run distributed applications. Developers will be able to store, deploy and run their codes remote in different locations and the codes are secure in a decentralized way.

XPhone

Beyond crypto: First true blockchain phone that is secured and decentralized to the core
XPhone is the world’s first blockchain phone which is designed with innovative features that are not found on other smartphones.
Powered by Function X, an ecosystem built entirely on and for the blockchain, XPhone runs on a new transmission protocol for the blockchain age. The innovation significantly expands the use of blockchain technology beyond financial transfers.
Unlike traditional phones which require a centralized service provider, XPhone runs independently without the need for that. Users can route phone calls and messages via blockchain nodes without the need for phone numbers.
Once the XPhone is registered on the network, for e.g., by a user named Pitt, if someone wants to access Pitt’s publicly shared data or content, that user can just enter FXTP://xxx.Pitt. This is similar to what we do for the traditional https:// protocol.
Whether Pitt is sharing photos, data, files or a website, they can be accessed through this path. And if Pitt’s friends would like to contact him, they can call, text or email his XPhone simply by entering “call.pitt”, “message.pitt”, or “mail.pitt”.
The transmission of data runs on a complex exchange of public and private key data with encryption. It can guarantee communication without interception and gives users direct access to the data shared by others. Any information that is sent or transacted over the Function X Blockchain will also be recorded on the chain.
Toggle between now and the future
Blockchain-based calling and messaging can be toggled on and off on the phone operating system which is built on Android 9.0. XPhone users can enjoy all the blockchain has to offer, as well as the traditional functionalities of an Android smartphone.
We’ll be sharing more about the availability of the XPhone and further applications of Function X in the near future.

DApps

DApps for mass adoption
So far the use of decentralized applications has been disappointing. But what if there was a straightforward way to bring popular, existing apps into a decentralized environment, without rebuilding everything? Until now, much of what we call peer-to-peer or ‘decentralized’ services continue to be built on centralized networks. We set out to change that with Function X; to disperse content now stored in the hands of the few, and to evolve services currently controlled by central parties.
Use Cases: Sharing economy
As seen from our ride-hailing DApp example that was demonstrated in New York back in November 2018, moving towards true decentralization empowers the providers of services and not the intermediaries. In the same way, the XPhone returns power to users over how their data is being shared and with whom. Function X will empower content creators to determine how their work is being displayed and used.
Use Cases: Free naming
One of the earliest alternative cryptocurrencies, Namecoin, wanted to use a blockchain to provide a name registration system, where users can register their names to create a unique identity. It is similar to the DNS system mapping to IP addresses. With the Node Name System (NNS) it is now possible to do this on the blockchain.
NNS is a distributed version of the traditional Domain Name System. A NNS allows every piece of Function X hardware, including the XPhone, to have a unique identifier that can be named anything with digits and numbers, such as ‘JohnDoe2018’ or ‘AliceBob’.
Use Cases: Mobile data currency
According to a study, mobile operator data revenues are estimated at over $600 billion USD by 2020, equivalent to $50 billion USD per month [appendix]. Assuming users are able to use services such as blockchain calls provided by XPhone (or other phones using Function X) the savings will be immense and the gain from profit can be passed on to providers such as DApp developers in Function X. In other words, instead of paying hefty bills to a mobile carrier for voice calls, users can pay less by making blockchain calls, and the fees paid are in f(x) coins. More importantly users will have complete privacy over their calls.
Use Cases: Decentralized file storage
Ethereum contracts claim to allow for the development of a decentralized file storage ecosystem, “where individual users can earn small quantities of money by renting out their own hard drives and unused space can be used to further drive down the costs of file storage.” However, they do not necessarily have the hardware to back this up. With the deployment of XPOS, smart hardware nodes and more, Function X is a natural fit for Decentralized File Storage. In fact, it is basically what f(x) IPFS is built for.
These are just four examples of the many use cases purported, and there can, will and should be more practical applications beyond these; we are right in the middle of uncharted territories.

Tokenomics

Decentralized and autonomous
The f(x) ecosystem is fully decentralized. It’s designed and built to run autonomously in perpetuity without the reliance or supervision of any individual or organization. To support this autonomous structure, f(x) Coin which is the underlying ‘currency’ within the f(x) ecosystem has to be decentralized in terms of its distribution, allocation, control, circulation and the way it’s being generated.
To get the structure of f(x) properly set up, the founding team will initially act as ‘initiators’ and ‘guardians’ of the ecosystem. The role of the team will be similar to being a gatekeeper to prevent any bad actors or stakeholders playing foul. At the same time, the team will facilitate good players to grow within the ecosystem. Once the f(x) ecosystem is up and running, the role of the founding team will be irrelevant and phased out. The long term intention of the team is to step away, allowing the ecosystem to run and flourish by itself.

Utility

In this section, we will explore the utility of the f(x) Coin. f(x) Coin is the native ‘currency’ of the Function X blockchain and ecosystem. All services rendered in the ecosystem will be processed, transacted with, or “fueled” by the f(x) Coin. Some of the proposed use cases include:
  • For service providers: Getting paid by developers, companies and consumers for providing storage nodes, DDocker and improvement of network connections. The role of service providers will be described in greater detail in the rest of the paper.
  • For consumers: Paying for service fees for the DApps, nodes, network resources, storage solutions and other services consumed within the f(x) ecosystem.
  • For developers: Paying for services and resources rendered in the ecosystem such as smart contract creation, file storage (paid to IPFS service provider), code hosting (paid to DDocker service provider), advertisements (paid to other developers) and design works. Developers can also get paid by enterprises or organizations that engaged in the developer’s services.
  • For enterprises or organizations: Paying for services provided by developers and advertisers. Services provided to consumers will be charged and denominated in f(x) Coin.
  • For phone and hardware manufacturers: Paying for further Function X OS customizations. It is worth noting that Pundi X Labs plan to only build a few thousand devices of the XPhone flagship handsets, and leave the subsequent market supply to be filled by third-party manufacturers using our operating system.
  • For financial institutions: receiving payments for financial services rendered in the ecosystem.
  • Applications requiring high throughput.
Hence f(x) Coin can be used as ‘currency’ for the below services,
  • In-app purchases
  • Blockchain calls
  • Smart contract creations
  • Transaction fees
  • Advertisements
  • Hosting fees
  • Borderless/cross-border transactions
We believe f(x) Coin utilization will be invariably higher than other coins in traditional chains due to the breadth of the f(x) ecosystem. This includes storage services and network resources on f(x) that will utilize the f(x) Coin as “fuel” for execution and validation of transactions.
Example 1: A developer creates a ride-hailing DApp called DUber.
DUber developer first uploads the image and data to IPFS (storage) and code to DDocker, respectively. The developer then pays for a decentralized code hosting service provided by the DDocker, and a decentralized file hosting service provided by the IPFS. Please note the storage hosting and code hosting services can be provided by a company, or by a savvy home user with smart nodes connected to the Function X ecosystem. Subsequently, a DUber user pays the developer.
Example 2: User Alice sends an imaginary token called ABCToken to Bob.
ABCToken is created using Function X smart contract. Smart nodes hosted at the home of Charlie help confirms the transaction, Charlie is paid by Alice (or both Alice and Bob).

The flow of f(x) Coin

Four main participants in f(x): Consumer (blue), Developer (blue), Infrastructure (blue), and Financial Service Provider (green)
Broadly speaking, there can be four main participants in the f(x) ecosystem, exhibited by the diagram above:
  • Consumer: Users enjoy the decentralized services available in the f(x) ecosystem
  • Infrastructure Service Provider: Providing infrastructures that make up the f(x) ecosystem such as those provided by mobile carriers, decentralized clouds services.
  • Developer: Building DApp on the f(x) network such as decentralized IT, hospitality and financial services apps.
  • Financial Service Provider: Providing liquidity for the f(x) Coin acting as an exchange.
The f(x) ecosystem’s value proposition:
  • Infrastructure service providers can offer similar services that they already are providing in other markets such as FXTP, DDocker and IPFS, to earn f(x) Coin.
  • Developers can modify their existing Android apps to be compatible with the f(x) OS environment effortlessly, and potentially earn f(x) Coin.
  • Developers, at the same time, also pay for the infrastructure services used for app creation.
  • Consumers immerse in the decentralized app environments and pay for services used in f(x) Coin.
  • Developer and infrastructure service providers can earn rewards in f(x) Coin by providing their services. They can also monetize it through a wide network of financial service providers to earn some profit, should they decide to do so.
Together, the four participants in this ecosystem will create a positive value flow. As the number of service providers grow, the quality of service will be enhanced, subsequently leading to more adoption. Similarly, more consumers means more value is added to the ecosystem by attracting more service providers,and creating f(x) Coin liquidity. Deep liquidity of f(x) Coin will attract more financial service providers to enhance the stability and quality of liquidity. This will attract more service providers to the ecosystem.
Figure: four main participants of the ecosystem The rationale behind f(x) Coin generation is the Proof of Service concept (PoS)
Service providers are crucial in the whole f(x) Ecosystem, the problem of motivation/facilitation has become our priority. We have to align our interests with theirs. Hence, we have set up a Tipping Jar (similar to mining) to motivate and facilitate the existing miners shift to the f(x) Ecosystem and become part of the infrastructure service provider or attract new players into our ecosystem. Income for service provider = Service fee (from payer) + Tipping (from f(x) network generation)
The idea is that the f(x) blockchain will generate a certain amount of f(x) Coin (diminishing annually) per second to different segments of service provider, such as in the 1st year, the f(x) blockchain will generate 3.5 f(x) Coin per second and it will be distributed among the infrastructure service provider through the Proof of Service concept. Every service provider such as infrastructure service providers, developers and financial service providers will receive a ‘certificate’ of Proof of Service in the blockchain after providing the service and redeeming the f(x) Coin.
Example: There are 3 IPFS providers in the market, and the total Tipping Jar for that specific period is 1 million f(x) Coin. Party A contributes 1 TB; Party B contributes 3 TB and Party C contributes 6 TB. So, Party A will earn 1/10 * 1 million = 100k f(x) Coin; Party B will earn 3/10 * 1 million = 300k f(x) Coin. Party C will earn 6/10 * 1 million = 600k f(x) Coin.
Note: The computation method of the distribution of the Tipping Jar might vary due to the differences in the nature of the service, period and party.
Figure: Circulation flow of f(x) Coin
The theory behind the computation.
Blockchain has integrated almost everything, such as storage, scripts, nodes and communication. This requires a large amount of bandwidth and computation resources which affects the transaction speed and concurrency metric.
In order to do achieve the goal of being scalable with high transaction speed, the f(x) blockchain has shifted out all the ‘bulky’ and ‘heavy duty’ functions onto other service providers, such as IPFS, FXTP, etc. We leave alone what blockchain technology does best: Calibration. Thus, the role of the Tipping Jar is to distribute the appropriate tokens to all participants.
Projected f(x) Coin distribution per second in the first year
According to Moore’s Law, the number of transistors in a densely integrated circuit doubles about every 18 -24 months. Thus, the performance of hardware doubles every 18-24 months. Taking into consideration Moore’s Law, Eric Schmidt said if you maintain the same hardware specs, the earnings will be cut in half after 18-24 months. Therefore, the normal Tipping Jar (reward) for an infrastructure service provider will decrease 50% every 18 months. In order to encourage infrastructure service providers to upgrade their hardware, we have set up another iteration and innovation contribution pool (which is worth of 50% of the normal Tipping Jar on the corresponding phase) to encourage the infrastructure service provider to embrace new technology.
According to the Andy-Bill’s law, “What Andy gives, Bill takes away”; software will always nibble away the extra performance of the hardware. The more performance a piece of hardware delivers, the more the software consumes. Thus, the developer will always follow the trend to maintain and provide high-quality service. The Tipping Jar will increase by 50% (based upon the previous quota) every 18 months.
Financial service providers will have to support the liquidation of the whole ecosystem along the journey, the Tipping Jar (FaaS) will increase by 50% by recognizing the contribution and encouraging innovation.
From the 13th year (9th phase), the Tipping Jar will reduce by 50% every 18 months. We are well aware that the “cliff drop” after the 12th year is significant. Hence, we have created a 3year (two-phase) diminishing transition period. The duration of each phase is 18 months. There are 10 phases in total which will last for a total of 15 years.
According to Gartner’s report, the blockchain industry is forecast to reach a market cap of
3.1 trillion USD in 2030. Hence, we believe a Tipping Jar of 15 years will allow the growth of Function X into the “mature life cycle” of the blockchain industry.

f(x) Coin / Token Allocation

Token allocation We believe great blockchain projects attempt to equitably balance the interests of different segments of the community. We hope to motivate and incentivize token holders by allocating a total of 65% of tokens from the Token Generation Event (TGE). Another 20% is allocated to the Ecosystem Genesis Fund for developer partnerships, exchanges and other such related purposes. The remaining 15% will go to engineering, product development and marketing. There will be no public or private sales for f(x) tokens.
NPXS / NPXSXEM is used to make crypto payments as easy as buying bottled water, while f(x) is used for the operation of a decentralized ecosystem and blockchain, consisting of DApps and other services. NPXS / NPXSXEM will continue to have the same functionality and purpose after the migration to the Function X blockchain in the future. Therefore, each token will be expected to assume different fundamental roles and grant different rights to the holders.
https://preview.redd.it/xohy6c6pprv21.png?width=509&format=png&auto=webp&s=a2c0bd0034805c5f055c3fea4bd3ba48eb59ff07
65% of allocation for NPXS / NPXSXEM holders is broken down into the following: 15% is used for staking (see below) 45% is used for conversion to f(x) tokens. (see below) 5% is used for extra bonus tasks over 12 months (allocation TBD).

https://preview.redd.it/6jmpfhmxprv21.png?width=481&format=png&auto=webp&s=c9eb2c124e0181c0851b7495028a317b5c9cd6b7
https://preview.redd.it/1pjcycv0qrv21.png?width=478&format=png&auto=webp&s=c529d5d99d760281efd0c3229edac494d5ed7750
Remarks All NPXS / NPXSXEM tokens that are converted will be removed from the total supply of NPXS / NPXSXEM; Pundi X will not convert company's NPXS for f(x) Tokens. This allocation is designed for NPXS/NPXSXEM long term holders. NPXS / NPXSXEM tokens that are converted will also be entitled to the 15% f(x) Token distribution right after the conversion.

Usage

Management of the Ecosystem Genesis Fund (EGF)
The purpose of setting up the Ecosystem Initialization Fund, is to motivate, encourage and facilitate service providers to join and root into the f(x) Ecosystem and, at the same time, to attract seed consumers to enrich and enlarge the f(x) Ecosystem. EIF comes from funds raised and will be used as a bootstrap mechanism to encourage adoption before the Tipping Jar incentives fully kicks in.
The EGF is divided into 5 parts:
  1. Consumer (10%): To attract consumers and enlarge the customer base;
  2. Developer (20%): To encourage developers to create DApps on the f(x) blockchain;
  3. Infrastructure Service Provider (20%): To set up or shift to the f(x) infrastructure;
  4. Financial Service Provider (20%): To create a trading platform for f(x) Coin and increase liquidity; and
  5. Emergency bridge reserve (30%): To facilitate or help the stakeholders in f(x) during extreme market condition
To implement the spirit of decentralization and fairness, the EGF will be managed by a consensus-based committee, called the f(x) Open Market Committee (FOMC).

Summary

Time moves fast in the technology world and even faster in the blockchain space. Pundi X’s journey started in October 2017, slightly over a year ago, and we have been operating at a lightning pace ever since, making progress that can only be measured in leaps and bounds. We started as a blockchain payment solution provider and have evolved into a blockchain service provider to make blockchain technology more accessible to the general public, thereby improving your everyday life.
The creation of Function X was driven by the need to create a better suited platform for our blockchain point-of sale network and through that process, the capabilities of Function X have allowed us to extend blockchain usage beyond finance applications like payment solutions and cryptocurrency.
The complete decentralized ecosystem of Function X will change and benefit organizations, developers, governments and most importantly, society as a whole.
The XPhone prototype which we have created is just the start to give everyone a taste of the power of Function X on how you can benefit from a truly decentralized environment. We envision a future where the XPOS, XPhone and other Function X-enabled devices work hand-in-hand to make the decentralized autonomous ecosystem a reality.
You may wonder how are we able to create such an extensive ecosystem within a short span of time? We are fortunate that in today’s open source and sharing economy, we are able to tap onto the already established protocols (such as Consensus algorithm, FXTP, etc), software (like Android, IPFS, PBFT, Dockers, etc.) and hardware (design knowledge from existing experts) which were developed by selfless generous creators. Function X puts together, aggregates and streamlines all the benefits and good of these different elements and make them work better and seamlessly on the blockchain. And we will pay it forward by making Function X as open and as decentralized as possible so that others may also use Function X to create bigger and better projects.
To bring Function X to full fruition, we will continue to operate in a transparent and collaborative way. Our community will continue to be a key pillar for us and be even more vital as we get Function X up and running. As a community member, you will have an early access to the Function X ecosystem through the f(x) token conversion.
We hope you continue to show your support as we are working hard to disrupt the space and re-engineer this decentralized world.

Reference

Practical Byzantine Fault Tolerance
http://pmg.csail.mit.edu/papers/osdi99.pdf
Byzantine General Problem technical paper
https://web.archive.org/web/20170205142845/http://lamport.azurewebsites.net/pubs/byz.pdf
Global mobile data revenues to reach $630 billion by 2020
https://www.parksassociates.com/blog/article/pr-07112016
NPXSXEM token supply
https://medium.com/pundix/a-closer-look-at-npxsxem-token-supply-843598d0e7b6
NPXS circulating token supply and strategic purchaser
https://medium.com/pundix/total-token-supply-and-strategic-investors-b41717021583
[total supply might differ from time to time due to token taken out of total supply aka “burn”]
ELC: SpaceX lessons learned (PBFT mentioned) https://lwn.net/Articles/540368/

Full: https://functionx.io/assets/file/Function_X_Concept_Paper_v2.0.pdf
submitted by crypt0hodl1 to PundiX [link] [comments]

Monumental AIOMiner Update v8.4 - Mine RVN while paying 0% Fees to us, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on Reddit(/gpumining). Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
submitted by AIOMiner to Ravencoin [link] [comments]

Just left NiceHash for MiningPoolHub due to August 1st, will return after the dust settles

Hi everyone,
Since NH is behind the 8 ball when it comes to being paid in alt coins like LTC, I have decided to move to MiningPoolHub, if anyone is interested it's an auto switching mining pool that mines only the most profitable coins based upon whattomine's website for a particular algorithm. Cool part is they have less fees and an auto exchange to pay in alt coins, so it kind of gets around some of NiceHash's limitations.
I am hoping August 1st to November will be a nothingburger, and plan on returning to NH, but if not, i wanted to share this to help other miners considering a different pool due to the Bitcoin forking issue. It's really BS that Bitcoin is going through this drama.
I hope my info helps.
submitted by technofox01 to NiceHash [link] [comments]

Idea to Auto Exchange to multiple coins

I think good way to improve MPH would be to offer auto exchange to multiple coins and be able to choose your % allocations. So for example if I wanted to auto exchange to 3 coins, bitcoin, litecoin and ethereum but I wanted to have say 50% bitcoin, 25% litecoin and 25% ethereum then mining pool hub would auto exchange based off that allocation. Perhaps they could set a cap of like 3 or 5 coins or something or maybe it's feasible to have an unlimited amount of choices. If you wanted to auto exchange to every coin you could do that as long as your allocations of coins totals up to 100%.
After all I imagine a lot of users here desire more than 1 coin and are frequently going to the auto exchange page and switching the coin that they want to get a nice mix.
submitted by MrETF to MiningPoolHub [link] [comments]

After NiceHash hack yesterday, I came up with this idea of a multicurrency GUI miner. Posting it here for discussion.

MultiHash - A multicurrency round-robin easy-to-use crypto miner

I will be honest, my first serious attempt at altcoin mining was using Minergate. I thought it was very cool how it could automatically determine what currency to mine from a pool of multiple currencies. Then as I started doing more research and started trying out different miner software to compare different stats and customizability, I realized Minergate was basically using all of my CPU and showing me less than half the number of hashes per second I can get using only 50% of my CPU. I stopped using Minergate and started using individual miner software per altcoin, even sometimes switching between two miners of the same currency, just to donate the devs who have worked hard for making his mining software. But it was kind of a redundant process everytime I wanted to try out some different configuration and version or even a new alternate mining software. Enter NiceHash. My life kinda changed, I became lazy. I'd just click start and forget. It brought the convenience of mining to an average user's reach. I really loved NiceHash. I thought their idea was unique and really cool. But after the latest hack, I think there should be an alternative to NiceHash, for the ones who want to mine different altcoins. I have not thought about it very thoroughly as I probably lack the required all the knowledge, but I've come up with a concept I'd like to share with the community.
MultiHash (I could not come up with a better name, feel free to change it to whatever you want), in principle, will be a little different from what NiceHash was. It is more like a convenient way to configure and mine using the individual mining software for different currencies in their respective pools. Here is how I think it'll work:

The Framework:

The following 3 bodies need to work together to make this work: 1. The MultiHash GUI: * Preferably made using a cross-platform toolkit like Qt (preferred) or Electron. * Simple setup requires 1 BTC address. Advanced setup can be done for per currency wallets. * An inbuilt interface for benchmarking all the supported mining software. * Option to auto mine the most profitable currency within user selected time frame. * Option to mine user selected currencies in a round-robin or fixed schedules. * Show detailed pool stats * [Advanced] adding custom pool address * [Advanced] adding custom miner with their own config file * Extras 2. The Pools: * All pools selected should have a proper API which provides user stats like balance, hashes etc. * At first 4-5 pools per currency should be preconfigured in MultiHash. * Extras 3. The Exchange: * Proper API to do the transaction with the MultiHash GUI. * Proper API to generate/access wallet address for each currency. * Extras 

Detail Workflow:

1. The user installs the MultiHash GUI and provides his bitcoin address. * Advanced users may skip and add their own currency wallet address if they don't want to get paid in BTC 2. The MultiHash GUI generates corresponding other currency wallets in the exchange. (registration may be required?) * Not required if the user opted for per currency wallet of their own. 3. The auto mining will mine profitable currency as per users hardware benchmarks. * Advanced users may select what to mine and the pool to mine in. * Pools might be switched depending on the ratio of the hash power of the pool and total hash power of the whole coin network. or Roundrobin. * Pools will provide balance, hashes submitted, current pool hash rate data etc. through their API. 4. The pool will pay to the exchange wallet. the user can see his exchange balance in MultiHash GUI separately, from his pool balance. * Pool pays directly to user wallet if the user opted not to use the exchange. 5. The user chooses to convert all currency to bitcoin. 
I am just an average user interested in crypto. I am also not saying people should not use NiceHash (I probably won't anymore myself). I had a little bit of free time, so I decided to write down my thought. It may very well be a dumb idea, or maybe there are complexities in the process I don't know about. So please take this as just an idea and provide your feedback if you think something needs a correction. Also, if someone is interested in making this project a reality please let me know. I'd like to be a part of the journey.
submitted by patraanjan23 to CryptoCurrency [link] [comments]

Monumental AIOMiner Update v8.4 - Mine CLO while paying 0% Fees to us, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on Reddit(/gpumining). Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
submitted by AIOMiner to CallistoCrypto [link] [comments]

Monumental AIOMiner Update v8.4 - Mine the most profitable currencies on 74+ Algorithms (1000+ coins) while paying 0% Fees, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on Reddit(/gpumining). Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
submitted by AIOMiner to MiningPoolHub [link] [comments]

Monumental AIOMiner Update v8.4 - Mine VTC while paying 0% Fees, now with free Online Rig Monitoring for your entire farm!

Hi Everyone!

We’re excited to be able to call AIOMiner, the best miner on the planet!
 
First of all, thank you so much for all of your support over this past year! Your constant suggestions in Discord have helped make AIOMiner what it is today and we are endlessly grateful!  
If you haven’t yet, here are some quick links to get involved with AIOMiner:

Humble Beginnings

If you’re not familiar with AIOMiner, we were born right here on Reddit(/gpumining). Almost exactly one year ago, xixspiderxix became frustrated with the lack of functionality, ugliness, and the high difficulty required to get started with the already existing miners. Originally, he was just going to make it for himself to enhance his own mining experience, but others started asking for access to the software, suggesting new features, and helping him improve. So, he opened it up to the public for free and AIOMiner was born. And to this day, we maintain our promise that mining with AIOMiner will always be free. You can read more about it here, but let’s get to the good stuff!
 

What’s New in AIOMiner?

We now have remote rig monitoring and control through our website! We’ve just enabled the AIOMiner application to connect to the AIOMiner website through an API and fixed some bugs. If you’ve never used AIOMiner before, here are some of the features you can expect on the software side of things:
 
The biggest part of the update is a full rebuild of AIOMiner.com. We're bringing you remote control of your rigs via the AIOMiner website so you can stop paying for services, like Teamviewer, and manage all of your rigs from anywhere you have an internet connection!
 
Here's what you can expect from AIOMiner.com:
Whew! That's a lot, but believe it or not... we're just getting started! We still have plenty planned to maximize your rig efficiency, control, and profitability.
 

All of my favorite miners?

If not all of them, then certainly a good chunk of your favorites and we make sure they are updated daily!

74 Algorithms? Prove it!

takes deep breath
  1. Ethash
  2. CryptoNightHeavy
  3. PHI1612
  4. Zhash
  5. CryptoNightSaber
  6. Lyra2REv2
  7. NeoScrypt
  8. Phi2
  9. CryptoNightV8
  10. TimeTravel10 (BitCore)
  11. x16r
  12. CryptoNightV7
  13. Lyra2z
  14. Hex
  15. Xevan
  16. ProgPoW
  17. 1927-genesis
  18. Geek
  19. Aergo
  20. BCD
  21. Sonoa
  22. Bytom
  23. Renesis
  24. SolidtySha3
  25. CryptoNight-Lite
  26. Aeriumx
  27. Zhash_zel
  28. Zhash_BTG
  29. Zhash_Snow
  30. Zhash_Zcash
  31. Zhash_Safe
  32. Zhash_ltz
  33. x16s
  34. Allium
  35. Zero
  36. Tribus
  37. x14
  38. c11
  39. Darkcoin-mod
  40. Pascal
  41. Blake14r
  42. Vanilla
  43. Blake
  44. Groestl
  45. Skein
  46. Myriad-groestl
  47. Keecakc
  48. Polytimos
  49. Whirpool
  50. Lbry
  51. Jha
  52. Skunk
  53. Phi
  54. Keccak
  55. Sib
  56. Blake2b
  57. Nist5
  58. Veltor
  59. Blakecoin
  60. Blake2s
  61. HSR
  62. x11evo
  63. TimeTravel
  64. Equihash
  65. x17
  66. x17gost
  67. CryptoNight
  68. CryptoNightRTO
  69. CryptoNightXAO
  70. CryptoNightMSR
  71. CryptoNightXTL
  72. CryptoNightLightv0
  73. CryptoNightLightv1
  74. CryptoNightHaven
Q: How many cryptocurrencies does that cover?
A: ¯\(ツ)/¯ We stopped counting when we reached 1,000.

Is it safe?

Of course, but don't take it from us! Here's a 3rd party analysis on the software:
https://www.hybrid-analysis.com/sample/e8f518e55783a853659938ed1c25f441acf5c8cf2e7730ce3135f2dd231759b2?environmentId=120

What's Free Hash Friday?

Every week we put on an event called Free Hash Friday, and don’t call the DEA because we're not giving away weed! Maybe Canada can help you with that, but here's the general rundown for Free Hash Friday:  
The AIOMiner team sends out a tweet every week with directions in an image, such as this one.  
Follow the directions in the tweet where it says "To Win" with the arrows. Once you've completed those three steps, your twitter handle will be inputted into a spreadsheet (that is shared with the public) and you'll be assigned a number in the order that you're inputted.  
You have until 8pm US Pacific Time (GMT -7) to enter. At 8pm, the spreadsheet will be updated one final time and the drawing will begin immediately in the AIOMiner discord channel.  
You'll notice on the spreadsheet that you have a number next to your twitter handle. We have a bender bot that is able to generate a random number given the upper and lower limit. If your number is the randomly generated number, you win!  
Typically we pair with a coin, as you can see, who puts up some to giveaway and we have multiple winners. If we don't have a coin to give away, The AIOMiner team will simply start mining on behalf of the winner for 24 hours and mine any gpu-mineable coin of their choice.  
And that's pretty much it! So, follow our twitter and be on the lookout for the next Free Hash Friday!
 

What else should I know about AIOMiner?

We are fully committed to keeping mining free for everyone, but it does cost some money to keep the servers up and running. So, we're planning on releasing some "premium" features in the near future that will take the mining experience to the next level. Until December 1st, we will allow users to donate/purchase a lifetime premium account. With this account you will gain access to AIOMiner and all of the premium features that we release as well as any future product we make for free. This is only for a limited time, so if you're in the mining game for the long haul, it is definitely worth it. After December 1st, we will open up the premium features on a membership/monthly subscription basis. So, get it while it's hot!
 
Other than that, enjoy the software, enjoy the giveaways and come participate in the community:
 
Thank you again to everyone who has helped make AIOMiner what it is today!
 
Happy Mining,
-The AIOMiner Team
submitted by AIOMiner to VertcoinMining [link] [comments]

Solo Mining (PIRL) : 1 week experiment Complete Part 3 How to Mine DigiByte-Skein with Awesome Miner & Mining Pool Hub - Ep13 EMCD Bitcoin & Litecoin Mining Pool Review How to Mine Zcoin - XZC Mining Pool Setup Mining pools - bitcoin mining pools: how to generate bitcoin using mining pools cryptocurrency #15

The cost per TH/s is always fixed. Right now, all Bitcoin mining pool subscriptions charge between $200 and $300 per TH/s.Features of bitcoin cloud mining pool. You don’t need any special training to start mining, you can start mining at any time, Again, you’re just paying Pool.Bitcoin to operate mining equipment on your behalf. The price of each T is definitely higher than mining rig’s. You don’t own a miner, you can’t benefit from the appreciation of mining rig. In short, simple pattern and easy management of cloud mining have made cloud mining the best way for bitcoin mining novice. Not the only way, but not a bad way to start. Advanced features include auto switching, auto tuning, monitoring, auto exchanging and full remote management. Choose an optimised OS and firmware or a full GUI miner. Cudo’s machine learning miner is both simple-to-use and advanced in control, enabling you to fine-tune your mining for maximum returns in multiple currency options. For the auto-switching pool, we are using multipool.us all payouts will follow the guide we wrote for multi pool mining which you can read by clicking here. We will post the results weekly to the end of this post as well as posting a separate analysis once the test is complete. WafflePool is a multi-coin (scrypt) mining pool. Point your miner to WafflePool with a Bitcoin address as your username, and we take care of automatically mining the most profitable coin at all times, converting the earnings from each coin into Bitcoins, and paying you out in bitcoins!

[index] [7467] [22131] [15836] [3717] [25060] [8216] [22958] [23018] [6827] [16985]

Solo Mining (PIRL) : 1 week experiment Complete Part 3

In this video we show how to mine Zcoin (XZC) from scratch. Zcoin Mining Pool: https://2miners.com/xzc-mining-pool Binance crypto exchange is used. How to Re... How to setup Antminer a3 + Antpool Mining Pool in 60 seconds - Duration: 1:09. 60 Second Crypto 7,377 views. ... Bitcoin Mining HOW TO CASH OUT BITCOIN - TURN BITCOIN INTO CASH! - Duration: 11 ... How do Mining Pools Work And How To Choose a Pool To Join The graph above shows the market share of the most popular bitcoin mining pools 10 Best and Biggest Bitcoin Mining Pools 2018 Best mining ... Now that NICEHASH is down, what is a good alternative for mining with most profitable coin auto switching? In this step by step tutorial, you will learn how to create your account in a pool that ... EMCD is a profit switching sha-256 and scrypt mining pool, basically, the pool will mine whatever coin is most profitable with your mining rigs, and pay you out once per day with your earnings.

Flag Counter